MINNESOTA MINING MFG CO DENTAL PROD DIV -- 6160J EXPRESS VINYL POLYSILOXANE REGISTRATION MATERIAL  -- 6520-00F012425
<pre>=====================  Product Identification  =====================

Product ID:6160J EXPRESS VINYL POLYSILOXANE REGISTRATION MATERIAL
MSDS Date:04/16/1992
FSC:6520
NIIN:00F012425
Kit Part:Y
=== Responsible Party ===
Company Name:MINNESOTA MINING MFG CO DENTAL PROD DIV
Address:3M CENTER
City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-737-4114
Emergency Phone Num:612-737-4114
CAGE:76381
=== Contractor Identification ===
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
Company Name:MINNESOTA MINING AND MFG CO DENTAL PRODUCTS DIV
Address:3M CENTER
Box:City:SAINT	PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501
CAGE:0K0U5

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYSILOXANE VINYL
CAS:68083-19-2
Fraction by Wt: 18-22%

Ingred Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 35-40%
Other REC Limits:0.05 MG/CUM NIOSH
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:CARBONIC ACID, CALCIUM SALT (1:1), CALCIUM CARBONATE,
    DURAMITE
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 35-40%
Other REC Limits:10 MG/CUM (DUST)

Ingred Name:DEODORIZED KEROSENE
CAS:8020-83-5
RTECS #:HF9500000
Fraction by Wt: 4-6%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. CRYSTALLINE SILICON
    DIOXIDE HAS BEEN SHOWN TO PRODUCE SILICOSIS (FIBERPLASIA). SEE
    SUPP.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:EYES: REDNESS, SWELLING, PAIN, TEARING.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST
    15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO2, DRY CHEMICAL, WATER

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL. COVER W/ABSORBENT MATERIAL.
    COLLECT SPILLED MATERIAL. CLEAN UP RESIDUE. PLACE IN AN APPROVED
    METAL CONTAINER & SEAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT W/EYES. DON'T INGEST.
    STORE AT ROOM TEMPERATURE.

=============  Exposure Controls/Personal Protection  =============

Eye Protection:AS REQUIRED TO AVOID EYE CONTACT.
Supplemental Safety and Health
MIX CATALYST & BASE PARTS TOGETHER. HEALTH HAZARD IS FOR THE
    INGREDIENT'S DUST FORM, PRODUCT ITSELF IS NONTOXIC.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.7
Solubility in Water:INSOLUBLE
Appearance and Odor:HIGH CONSISTENCY PASTES, GREEN WHEN MIXED, NO ODOR.
Percent Volatiles by Volume: 0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF COMPLETELY CURED (OR POLYMERIZED)
    MATERIAL IN A SANITARY LANDFILL. DISPOSE OF WASTE PRODUCT IN A
    FACILITY PERMITTED TO ACCEPT CHEMICAL WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.