BOCCHI LABORATORIES INC -- PAUL MITCHELL SEAL N SHINE THERMO PROTECTOR, 11051  -- 8520-00N067324
<pre>=====================  Product Identification  =====================

Product ID:PAUL MITCHELL SEAL N SHINE THERMO PROTECTOR, 11051
MSDS Date:06/10/1991
FSC:8520
NIIN:00N067324
=== Responsible Party ===
Company Name:BOCCHI LABORATORIES INC
Address:20465 EAST WALNUT DR
City:WALNUT
State:CA
ZIP:91789
Country:US
Info Phone Num:714-598-1951
Emergency Phone Num:714-598-1951
CAGE:BCCHI
=== Contractor Identification ===
Company Name:BOCCHI LABORATORIES INC
Box:City:WALNUT
State:CA
ZIP:91789
Country:US
Phone:909-598-1951
CAGE:BCCHI

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYL ALCOHOL
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: <20%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM AREA TO FRESH AIR. SEEK MEDICAL ATTENTION
    IF RESPIRATORY IRRITATION DEVELOPS OR BREATHING BECOMES DIFFICULT.
    SKIN: RINSE WITH COOL WATER. EYES: FLUSH WITH ADEQUATE AMOUNT OF
    COOL WA TER FOR AT LEAST 15 MINUTES. INGEST: IFSWALLOWED, GIVE 3-4
    GLASSES OF WATER. DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:110F,43C
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . COOL FIRE-EXPOSED CONTAINERS WITH WATER
    SPRAY.
Unusual Fire/Explosion Hazard:VAPORS MAY BE IGNITED BY FLAMES, SPARKS
    AND EXCESSIVE HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CAUTION: FLOORS MAY BECOME SLIPPERY. WEAR
    APPROP PROTECTIVE EQUIP. DIKE & CONTAIN SPILL W/INERT MATL (SAND,
    ETC) & TRANSFER THE LIQUID & SOLID SEPARATELY TO CONTAINER FOR
    RECOVERY OR DISPOSAL. KEEP SP ILL OUT OF SEWERS AND OPEN BODIES OF
    WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM
    HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:KEEP CONTAINERS CLOSED UNTIL USED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE EITHER A NIOSH/MSHA APPROVED ATMOSPHERE
    SUPPLYING RESPIRATOR OR A NIOSH/MSHA APPROVED AIR PURIFYING
    RESPIRATOR FOR ORGANIC VAPORS DURING MANUFACTURING OF PRODUCT IF
    VAPOR LEVELS EXCEED EXPOSURE LI MITS.
Ventilation:NORMAL USE VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:OBSERVE NORMAL HYGIENIC PRACTICES. WASH HANDS
    AFTER PROD USE OR CONTACT. KEEP PROD SEPARATE FROM ALL FOOD &
    BEVERAGES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>185F,>85C
Spec Gravity:0.98 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:CLEAR TO SLIGHTLY HAZY HOMOGENOUS LIQUID.
Percent Volatiles by Volume:98

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND OPEN FLAME OR SPARKS.
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE CARBON
    MONOXIDE, CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.